Cost to Fence 1 Acre

Fencing in one acre takes about 835 linear feet of fence if the lot is square. Change any number below to price your exact project.

Updated October 2026 Adjusted for all 50 states + DC Free · no sign-up

Enter your project

Fill in the basics — we use typical values for everything else.

ft
More optionspost spacing, walk gates, double / drive gates
gates
gates
Free · no obligation

Get free quotes from local fence installers

Compare up to 3 prices from fence pros near you. Your estimate above is sent along so they quote the right job.

  • Takes 30 seconds
  • Free, with no obligation to hire
  • Use your estimate to spot an overpriced quote

Quick answer

Fencing in one acre takes about 835 linear feet of fence if the lot is square. A 4 ft chain-link fence costs about $10,202–$22,190 installed (2026 US average), including a walk gate and a double drive gate. Wood or vinyl privacy fencing costs roughly two to three times as much.

1 Acre = 43,560 sq ft. A square lot has a perimeter of 835 ft; a rectangular lot twice as long as it is wide needs about 885 ft.

Cost to fence one acre by material

Fence typeInstalled costPer foot
Chain link, 4 ft$10,202–$22,190$19/ft
Wood picket, 4 ft$12,874–$24,862$23/ft
Wood privacy, 6 ft$20,890–$37,220$35/ft
Vinyl privacy, 6 ft$25,900–$48,075$44/ft
Aluminum, 4 ft$23,562–$43,566$40/ft

What to know before you buy or hire

The price of fencing land is driven almost entirely by how many feet of fence you need, and that depends on the lot's shape as much as its size. Measure the actual property line, or use your county's parcel map, and subtract any side you won't fence (for example the front of the house or a neighbor's existing fence).

For pasture and livestock, most owners use agricultural wire fencing (woven wire, field fence or barbed wire with T-posts), which costs far less per foot than residential fencing and isn't priced by this calculator. For a backyard, pool or privacy, the residential types in the table are the right comparison.

By state: 1 acre in the 10 largest states

Same project, priced with each state's 2026 labor and material costs (installed by a contractor):

StateRangeTypical
North Carolina$9,080 – $19,749$14,414
Georgia$9,284 – $20,193$14,738
Texas$9,386 – $20,415$14,900
Florida$9,692 – $21,081$15,386
Ohio$9,896 – $21,524$15,710
Michigan$10,202 – $22,190$16,196
Pennsylvania$10,508 – $22,856$16,682
Illinois$11,222 – $24,409$17,816
New York$12,242 – $26,628$19,435
California$12,446 – $27,072$19,759

Your state isn't listed? Pick it in the calculator above — all 50 states and DC are adjusted.

Other sizes

Frequently asked questions

How many feet of fence is one acre?

About 835 feet for a square lot. Long, narrow lots need more: a lot twice as long as it is wide needs about 885 feet.

What is the cheapest way to fence one acre?

Chain link is the cheapest residential fence, at about $19/ft installed here. For livestock or open land, agricultural wire fencing on T-posts is cheaper still.

How long does it take to fence one acre?

A professional crew can usually install it in one to four days, depending on the fence type and ground conditions.

Estimates are for planning and comparing quotes, based on 2026 US average prices. They are not bids. How we estimate costs.