Typical fence costs in Texas (2026)
Estimated cost (installed by a contractor) for common projects in Texas, next to the US average. Change any option in the calculator above to price your exact project.
| Project | Texas range | Texas typical | US typical |
|---|---|---|---|
| Chain link, 4 ft | $1,776 – $3,910 | $2,843 | $3,090 |
| Wood privacy, 6 ft | $3,542 – $6,394 | $4,968 | $5,400 |
| Vinyl privacy, 6 ft | $4,370 – $8,188 | $6,279 | $6,825 |
| Aluminum, 4 ft | $3,984 – $7,443 | $5,713 | $6,210 |
What changes the price in Texas
Texas's climate: hot and humid in the east and along the Gulf, hot and dry in the west, with frequent spring hail. These local factors matter most for fence projects:
- Frost depth is shallow — minimal in South Texas and along the coast; roughly 6–24 in across North Texas and the Panhandle — so the standard 2 ft post depth works in most of the state.
- Rock and caliche add labor. In parts of Central and West Texas, contractors may need a rock auger or jackhammer to set posts and charge extra for it. Board-on-board cedar privacy fences are very common in Texas suburbs.
- Use ground-contact posts. Termite risk here is high (subterranean and, near the Gulf, Formosan termites). Use posts rated for ground contact, or choose vinyl or aluminum, which termites can't damage.
Labor, sales tax and permits in Texas
- Labor and prices: Texas's construction cost index is 0.92 — 8% below the US average, the 39th highest of the 50 states and DC. Prices in big metros (Houston, Dallas–Fort Worth, San Antonio) usually run above the state average, and rural areas below it.
- Sales tax: 6.25% state rate, up to 8.25% with local taxes. The estimates on this page don't include it.
- Building rules: Texas follows the International Residential Code inside city limits (many unincorporated county areas have little or no residential code, though HOA rules still apply). Permits and inspections are handled by your city or county, so confirm requirements with your local building department before you start.
Texas vs. other large states
150 ft of 6 ft wood privacy fence with 1 gate — typical cost in the 10 most populous states:
| State | Typical cost | vs. US avg |
|---|---|---|
| North Carolina | $4,806 | -11% |
| Georgia | $4,914 | -9% |
| Texas | $4,968 | -8% |
| Florida | $5,130 | -5% |
| Ohio | $5,238 | -3% |
| Michigan | $5,400 | — |
| Pennsylvania | $5,562 | +3% |
| Illinois | $5,940 | +10% |
| New York | $6,480 | +20% |
| California | $6,588 | +22% |
See all 50 states on the main fence cost calculator.
Frequently asked questions
How much does a new fence cost in Texas?
150 ft of 6 ft wood privacy fence with 1 gate costs about $3,542–$6,394 in Texas (typical $4,968), compared with $5,400 at the US average. Your exact price depends on size, materials and your contractor — use the calculator above for your own numbers.
How deep should fence posts be in Texas?
The frost line is minimal in South Texas and along the coast; roughly 6–24 in across North Texas and the Panhandle, so the standard rule of burying one-third of the post (about 2 ft for a 6 ft fence) works in most of the state.
Is a new fence cheaper in Texas than in other states?
Texas's construction cost index is 0.92, 8% below the US average and the 39th highest of the 50 states and DC. Among the 10 most populous states, Texas ranks 3rd cheapest for this project.
Does the estimate include sales tax?
No. Sales tax on materials in Texas is 6.25% state rate, up to 8.25% with local taxes. Contractors usually build it into their quotes, so compare quotes on the same basis.