Typical gravel costs in Texas (2026)
Estimated cost (bulk, delivered) for common projects in Texas, next to the US average. Change any option in the calculator above to price your exact project.
| Project | Texas range | Texas typical | US typical |
|---|---|---|---|
| Garden path, 3×30 ft, 3 in | $99 – $220 | $159 | $165 |
| Driveway section, 10×40 ft, 4 in | $240 – $470 | $355 | $367 |
| Full driveway, 12×60 ft, 6 in | $549 – $1,023 | $786 | $812 |
| Mulch beds, 200 sq ft, 3 in | $103 – $226 | $164 | $170 |
What changes the price in Texas
Texas's climate: hot and humid in the east and along the Gulf, hot and dry in the west, with frequent spring hail. These local factors matter most for gravel projects:
- Ask for flex base. That's the crushed limestone road base (TxDOT Item 247) that Texas suppliers sell for driveways; in West Texas, caliche is a cheaper local option. It packs hard and is the standard driveway base in Texas.
- Local stone is cheapest. In Texas, crushed limestone is the everyday stone across Central and North Texas. Stone hauled in from out of state costs noticeably more.
- Clay soil needs a thicker base. On expansive clay, 6 in or more of compacted flex base prevents ruts after heavy rain.
- Keep wood mulch away from the foundation. With high (subterranean and, near the Gulf, Formosan termites) termite risk, many homeowners use rock next to the house and mulch farther out.
Labor, sales tax and permits in Texas
- Labor and prices: Texas's construction cost index is 0.92 — 8% below the US average, the 39th highest of the 50 states and DC. Prices in big metros (Houston, Dallas–Fort Worth, San Antonio) usually run above the state average, and rural areas below it.
- Sales tax: 6.25% state rate, up to 8.25% with local taxes. The estimates on this page don't include it.
- Building rules: Texas follows the International Residential Code inside city limits (many unincorporated county areas have little or no residential code, though HOA rules still apply). Permits and inspections are handled by your city or county, so confirm requirements with your local building department before you start.
Texas vs. other large states
40×10 ft crushed stone driveway section, 4 in deep, delivered — typical cost in the 10 most populous states:
| State | Typical cost | vs. US avg |
|---|---|---|
| North Carolina | $351 | -4% |
| Georgia | $354 | -4% |
| Texas | $355 | -3% |
| Florida | $359 | -2% |
| Ohio | $362 | -1% |
| Michigan | $367 | — |
| Pennsylvania | $371 | +1% |
| Illinois | $381 | +4% |
| New York | $396 | +8% |
| California | $399 | +9% |
See all 50 states on the main gravel & mulch calculator.
Frequently asked questions
How much does gravel cost in Texas?
40×10 ft crushed stone driveway section, 4 in deep, delivered costs about $240–$470 in Texas (typical $355), compared with $367 at the US average. Your exact price depends on size, materials and your contractor — use the calculator above for your own numbers.
What is the best driveway gravel base in Texas?
Ask local suppliers for flex base — the crushed limestone road base (TxDOT Item 247) that Texas suppliers sell for driveways; in West Texas, caliche is a cheaper local option. It compacts into a hard base. Top it with a clean stone like #57 if you want a looser gravel surface.
Is gravel cheaper in Texas than in other states?
Texas's construction cost index is 0.92, 8% below the US average and the 39th highest of the 50 states and DC. Among the 10 most populous states, Texas ranks 3rd cheapest for this project.
Does the estimate include sales tax?
No. Sales tax on materials in Texas is 6.25% state rate, up to 8.25% with local taxes. Contractors usually build it into their quotes, so compare quotes on the same basis.