Typical gravel costs in Georgia (2026)
Estimated cost (bulk, delivered) for common projects in Georgia, next to the US average. Change any option in the calculator above to price your exact project.
| Project | Georgia range | Georgia typical | US typical |
|---|---|---|---|
| Garden path, 3×30 ft, 3 in | $98 – $219 | $159 | $165 |
| Driveway section, 10×40 ft, 4 in | $239 – $468 | $354 | $367 |
| Full driveway, 12×60 ft, 6 in | $546 – $1,019 | $782 | $812 |
| Mulch beds, 200 sq ft, 3 in | $102 – $225 | $164 | $170 |
What changes the price in Georgia
Georgia's climate: hot, humid summers and mild winters, with tropical storms on the coast. These local factors matter most for gravel projects:
- Ask for GAB (graded aggregate base). That's also sold as "crusher run" — crushed granite and fines that pack hard for driveways. It packs hard and is the standard driveway base in Georgia.
- Local stone is cheapest. In Georgia, crushed granite is the local stone, quarried across north and central Georgia. Stone hauled in from out of state costs noticeably more.
- Keep wood mulch away from the foundation. With high termite risk, many homeowners use rock next to the house and mulch farther out.
Labor, sales tax and permits in Georgia
- Labor and prices: Georgia's construction cost index is 0.91 — 9% below the US average, the 40th highest of the 50 states and DC. Prices in big metros (Atlanta, Augusta, Columbus) usually run above the state average, and rural areas below it.
- Sales tax: 4% state rate plus local taxes, usually 7–8.9% in total. The estimates on this page don't include it.
- Building rules: Georgia follows the Georgia State Minimum Standard Codes, based on the IRC with Georgia amendments. Permits and inspections are handled by your city or county, so confirm requirements with your local building department before you start.
Georgia vs. other large states
40×10 ft crushed stone driveway section, 4 in deep, delivered — typical cost in the 10 most populous states:
| State | Typical cost | vs. US avg |
|---|---|---|
| North Carolina | $351 | -4% |
| Georgia | $354 | -4% |
| Texas | $355 | -3% |
| Florida | $359 | -2% |
| Ohio | $362 | -1% |
| Michigan | $367 | — |
| Pennsylvania | $371 | +1% |
| Illinois | $381 | +4% |
| New York | $396 | +8% |
| California | $399 | +9% |
See all 50 states on the main gravel & mulch calculator.
Frequently asked questions
How much does gravel cost in Georgia?
40×10 ft crushed stone driveway section, 4 in deep, delivered costs about $239–$468 in Georgia (typical $354), compared with $367 at the US average. Your exact price depends on size, materials and your contractor — use the calculator above for your own numbers.
What is the best driveway gravel base in Georgia?
Ask local suppliers for GAB (graded aggregate base) — also sold as "crusher run" — crushed granite and fines that pack hard for driveways. It compacts into a hard base. Top it with a clean stone like #57 if you want a looser gravel surface.
Is gravel cheaper in Georgia than in other states?
Georgia's construction cost index is 0.91, 9% below the US average and the 40th highest of the 50 states and DC. Among the 10 most populous states, Georgia ranks 2nd cheapest for this project.
Does the estimate include sales tax?
No. Sales tax on materials in Georgia is 4% state rate plus local taxes, usually 7–8.9% in total. Contractors usually build it into their quotes, so compare quotes on the same basis.