Typical drywall costs in Georgia (2026)
Estimated cost (hung, taped & finished (pro)) for common projects in Georgia, next to the US average. Change any option in the calculator above to price your exact project.
| Project | Georgia range | Georgia typical | US typical |
|---|---|---|---|
| 10×10 ft room | $699 – $1,223 | $961 | $1,056 |
| 14×12 ft room | $997 – $1,745 | $1,371 | $1,507 |
| 20×15 ft room | $1,434 – $2,510 | $1,972 | $2,167 |
What changes the price in Georgia
Georgia's climate: hot, humid summers and mild winters, with tropical storms on the coast. These local factors matter most for drywall projects:
- Use mold-resistant board. In Georgia's humidity, use paper-free or mold-resistant drywall in bathrooms, laundry rooms and anywhere moisture lingers.
- Humidity slows the mud. Joint compound takes longer to dry in humid weather — run the AC or a dehumidifier so each coat is dry before the next.
- After flooding, cut above the water line. Wet drywall is usually removed at least 12 in above the high-water mark (a "flood cut") and replaced — pricing is often by the linear foot.
Labor, sales tax and permits in Georgia
- Labor and prices: Georgia's construction cost index is 0.91 — 9% below the US average, the 40th highest of the 50 states and DC. Prices in big metros (Atlanta, Augusta, Columbus) usually run above the state average, and rural areas below it.
- Sales tax: 4% state rate plus local taxes, usually 7–8.9% in total. The estimates on this page don't include it.
- Building rules: Georgia follows the Georgia State Minimum Standard Codes, based on the IRC with Georgia amendments. Permits and inspections are handled by your city or county, so confirm requirements with your local building department before you start.
Georgia vs. other large states
Hanging and finishing a 14×12 ft room (walls + ceiling) — typical cost in the 10 most populous states:
| State | Typical cost | vs. US avg |
|---|---|---|
| North Carolina | $1,341 | -11% |
| Georgia | $1,371 | -9% |
| Texas | $1,386 | -8% |
| Florida | $1,432 | -5% |
| Ohio | $1,462 | -3% |
| Michigan | $1,507 | — |
| Pennsylvania | $1,552 | +3% |
| Illinois | $1,658 | +10% |
| New York | $1,808 | +20% |
| California | $1,839 | +22% |
See all 50 states on the main drywall calculator.
Frequently asked questions
How much does drywall cost in Georgia?
Hanging and finishing a 14×12 ft room (walls + ceiling) costs about $997–$1,745 in Georgia (typical $1,371), compared with $1,507 at the US average. Your exact price depends on size, materials and your contractor — use the calculator above for your own numbers.
Do I need a permit for a drywall project in Georgia?
It depends on the scope. Georgia follows the Georgia State Minimum Standard Codes, based on the IRC with Georgia amendments. Small drywall jobs often don't need a permit, but anything structural, electrical or plumbing-related usually does — check with your city or county building department.
Is drywall cheaper in Georgia than in other states?
Georgia's construction cost index is 0.91, 9% below the US average and the 40th highest of the 50 states and DC. Among the 10 most populous states, Georgia ranks 2nd cheapest for this project.
Does the estimate include sales tax?
No. Sales tax on materials in Georgia is 4% state rate plus local taxes, usually 7–8.9% in total. Contractors usually build it into their quotes, so compare quotes on the same basis.