Typical drywall costs in Ohio (2026)
Estimated cost (hung, taped & finished (pro)) for common projects in Ohio, next to the US average. Change any option in the calculator above to price your exact project.
| Project | Ohio range | Ohio typical | US typical |
|---|---|---|---|
| 10×10 ft room | $745 – $1,304 | $1,024 | $1,056 |
| 14×12 ft room | $1,063 – $1,860 | $1,462 | $1,507 |
| 20×15 ft room | $1,529 – $2,675 | $2,102 | $2,167 |
What changes the price in Ohio
Ohio's climate: cold winters with lake-effect snow in the northeast and humid summers. These local factors matter most for drywall projects:
- Basements need moisture-resistant board and a small gap above the concrete floor so the drywall doesn't wick water.
- Older homes often have plaster walls. Patching plaster and lath costs more per square foot than drywall, and full replacement adds demolition and disposal.
Labor, sales tax and permits in Ohio
- Labor and prices: Ohio's construction cost index is 0.97 — 3% below the US average, the 25th highest of the 50 states and DC. Prices in big metros (Columbus, Cleveland, Cincinnati) usually run above the state average, and rural areas below it.
- Sales tax: 5.75% state rate plus a county tax, usually 6.75–8% in total. The estimates on this page don't include it.
- Building rules: Ohio follows the Residential Code of Ohio, which applies statewide to one-, two- and three-family homes. Permits and inspections are handled by your city or county, so confirm requirements with your local building department before you start.
Ohio vs. other large states
Hanging and finishing a 14×12 ft room (walls + ceiling) — typical cost in the 10 most populous states:
| State | Typical cost | vs. US avg |
|---|---|---|
| North Carolina | $1,341 | -11% |
| Georgia | $1,371 | -9% |
| Texas | $1,386 | -8% |
| Florida | $1,432 | -5% |
| Ohio | $1,462 | -3% |
| Michigan | $1,507 | — |
| Pennsylvania | $1,552 | +3% |
| Illinois | $1,658 | +10% |
| New York | $1,808 | +20% |
| California | $1,839 | +22% |
See all 50 states on the main drywall calculator.
Frequently asked questions
How much does drywall cost in Ohio?
Hanging and finishing a 14×12 ft room (walls + ceiling) costs about $1,063–$1,860 in Ohio (typical $1,462), compared with $1,507 at the US average. Your exact price depends on size, materials and your contractor — use the calculator above for your own numbers.
Do I need a permit for a drywall project in Ohio?
It depends on the scope. Ohio follows the Residential Code of Ohio, which applies statewide to one-, two- and three-family homes. Small drywall jobs often don't need a permit, but anything structural, electrical or plumbing-related usually does — check with your city or county building department.
Is drywall cheaper in Ohio than in other states?
Ohio's construction cost index is 0.97, 3% below the US average and the 25th highest of the 50 states and DC. Among the 10 most populous states, Ohio ranks 5th cheapest for this project.
Does the estimate include sales tax?
No. Sales tax on materials in Ohio is 5.75% state rate plus a county tax, usually 6.75–8% in total. Contractors usually build it into their quotes, so compare quotes on the same basis.