Typical drywall costs in Florida (2026)
Estimated cost (hung, taped & finished (pro)) for common projects in Florida, next to the US average. Change any option in the calculator above to price your exact project.
| Project | Florida range | Florida typical | US typical |
|---|---|---|---|
| 10×10 ft room | $730 – $1,277 | $1,003 | $1,056 |
| 14×12 ft room | $1,041 – $1,822 | $1,432 | $1,507 |
| 20×15 ft room | $1,497 – $2,620 | $2,059 | $2,167 |
What changes the price in Florida
Florida's climate: hot and humid year-round, with a June–November hurricane season. These local factors matter most for drywall projects:
- Use mold-resistant board. In Florida's humidity, use paper-free or mold-resistant drywall in bathrooms, laundry rooms and anywhere moisture lingers.
- Humidity slows the mud. Joint compound takes longer to dry in humid weather — run the AC or a dehumidifier so each coat is dry before the next.
- After flooding, cut above the water line. Wet drywall is usually removed at least 12 in above the high-water mark (a "flood cut") and replaced — pricing is often by the linear foot.
Labor, sales tax and permits in Florida
- Labor and prices: Florida's construction cost index is 0.95 — 5% below the US average, the 31st highest of the 50 states and DC. Prices in big metros (Miami, Tampa, Orlando) usually run above the state average, and rural areas below it.
- Sales tax: 6% state rate plus a county surtax in most counties (usually 0.5–1.5%). The estimates on this page don't include it.
- Building rules: Florida follows the Florida Building Code, which applies statewide and includes strict wind-load rules. Permits and inspections are handled by your city or county, so confirm requirements with your local building department before you start.
Florida vs. other large states
Hanging and finishing a 14×12 ft room (walls + ceiling) — typical cost in the 10 most populous states:
| State | Typical cost | vs. US avg |
|---|---|---|
| North Carolina | $1,341 | -11% |
| Georgia | $1,371 | -9% |
| Texas | $1,386 | -8% |
| Florida | $1,432 | -5% |
| Ohio | $1,462 | -3% |
| Michigan | $1,507 | — |
| Pennsylvania | $1,552 | +3% |
| Illinois | $1,658 | +10% |
| New York | $1,808 | +20% |
| California | $1,839 | +22% |
See all 50 states on the main drywall calculator.
Frequently asked questions
How much does drywall cost in Florida?
Hanging and finishing a 14×12 ft room (walls + ceiling) costs about $1,041–$1,822 in Florida (typical $1,432), compared with $1,507 at the US average. Your exact price depends on size, materials and your contractor — use the calculator above for your own numbers.
Do I need a permit for a drywall project in Florida?
It depends on the scope. Florida follows the Florida Building Code, which applies statewide and includes strict wind-load rules. Small drywall jobs often don't need a permit, but anything structural, electrical or plumbing-related usually does — check with your city or county building department.
Is drywall cheaper in Florida than in other states?
Florida's construction cost index is 0.95, 5% below the US average and the 31st highest of the 50 states and DC. Among the 10 most populous states, Florida ranks 4th cheapest for this project.
Does the estimate include sales tax?
No. Sales tax on materials in Florida is 6% state rate plus a county surtax in most counties (usually 0.5–1.5%). Contractors usually build it into their quotes, so compare quotes on the same basis.