Typical drywall costs in New York (2026)
Estimated cost (hung, taped & finished (pro)) for common projects in New York, next to the US average. Change any option in the calculator above to price your exact project.
| Project | New York range | New York typical | US typical |
|---|---|---|---|
| 10×10 ft room | $922 – $1,613 | $1,267 | $1,056 |
| 14×12 ft room | $1,315 – $2,302 | $1,808 | $1,507 |
| 20×15 ft room | $1,891 – $3,310 | $2,600 | $2,167 |
What changes the price in New York
New York's climate: cold, snowy winters (heavy lake-effect snow near Buffalo and Syracuse) and humid summers. These local factors matter most for drywall projects:
- Basements need moisture-resistant board and a small gap above the concrete floor so the drywall doesn't wick water.
- Older homes often have plaster walls. Patching plaster and lath costs more per square foot than drywall, and full replacement adds demolition and disposal.
Labor, sales tax and permits in New York
- Labor and prices: New York's construction cost index is 1.20 — 20% above the US average, the 5th highest of the 50 states and DC. Prices in big metros (New York City, Buffalo, Rochester) usually run above the state average, and rural areas below it.
- Sales tax: 4% state rate plus local taxes — 8–8.875% in most places, including New York City. The estimates on this page don't include it.
- Building rules: New York follows the Residential Code of New York State (New York City has its own NYC Construction Codes and permit process). Permits and inspections are handled by your city or county, so confirm requirements with your local building department before you start.
New York vs. other large states
Hanging and finishing a 14×12 ft room (walls + ceiling) — typical cost in the 10 most populous states:
| State | Typical cost | vs. US avg |
|---|---|---|
| North Carolina | $1,341 | -11% |
| Georgia | $1,371 | -9% |
| Texas | $1,386 | -8% |
| Florida | $1,432 | -5% |
| Ohio | $1,462 | -3% |
| Michigan | $1,507 | — |
| Pennsylvania | $1,552 | +3% |
| Illinois | $1,658 | +10% |
| New York | $1,808 | +20% |
| California | $1,839 | +22% |
See all 50 states on the main drywall calculator.
Frequently asked questions
How much does drywall cost in New York?
Hanging and finishing a 14×12 ft room (walls + ceiling) costs about $1,315–$2,302 in New York (typical $1,808), compared with $1,507 at the US average. Your exact price depends on size, materials and your contractor — use the calculator above for your own numbers.
Do I need a permit for a drywall project in New York?
It depends on the scope. New York follows the Residential Code of New York State (New York City has its own NYC Construction Codes and permit process). Small drywall jobs often don't need a permit, but anything structural, electrical or plumbing-related usually does — check with your city or county building department.
Is drywall cheaper in New York than in other states?
New York's construction cost index is 1.20, 20% above the US average and the 5th highest of the 50 states and DC. Among the 10 most populous states, New York ranks 9th cheapest for this project.
Does the estimate include sales tax?
No. Sales tax on materials in New York is 4% state rate plus local taxes — 8–8.875% in most places, including New York City. Contractors usually build it into their quotes, so compare quotes on the same basis.