Typical concrete costs in New York (2026)
Estimated cost (professionally poured & finished) for common projects in New York, next to the US average. Change any option in the calculator above to price your exact project.
| Project | New York range | New York typical | US typical |
|---|---|---|---|
| 10×10 ft patio, 4 in | $900 – $1,560 | $1,230 | $1,025 |
| 12×16 ft patio, 4 in | $1,728 – $2,995 | $2,362 | $1,968 |
| 12×40 ft driveway, 4 in | $4,320 – $7,488 | $5,904 | $4,920 |
| 24×24 ft garage slab, 4 in | $5,184 – $8,986 | $7,085 | $5,904 |
What changes the price in New York
New York's climate: cold, snowy winters (heavy lake-effect snow near Buffalo and Syracuse) and humid summers. These local factors matter most for concrete projects:
- Order air-entrained concrete for anything outdoors. New York freeze–thaw cycles crack and flake plain concrete, so a 4,000 psi air-entrained mix is the standard exterior order here.
- Footings and post holes go below the frost line — about 36 in around New York City and 42–48 in across most of upstate. Deeper holes mean more concrete than the national rule of thumb.
- Skip rock salt the first winter. De-icing salt scales young concrete; use sand for traction until the slab is a year old.
- Pouring season is roughly April–October. Cold-weather pours need insulated blankets and heated mix, which contractors charge extra for.
Labor, sales tax and permits in New York
- Labor and prices: New York's construction cost index is 1.20 — 20% above the US average, the 5th highest of the 50 states and DC. Prices in big metros (New York City, Buffalo, Rochester) usually run above the state average, and rural areas below it.
- Sales tax: 4% state rate plus local taxes — 8–8.875% in most places, including New York City. The estimates on this page don't include it.
- Building rules: New York follows the Residential Code of New York State (New York City has its own NYC Construction Codes and permit process). Permits and inspections are handled by your city or county, so confirm requirements with your local building department before you start.
New York vs. other large states
10×10 ft patio, 4 in thick, poured & finished — typical cost in the 10 most populous states:
| State | Typical cost | vs. US avg |
|---|---|---|
| North Carolina | $912 | -11% |
| Georgia | $933 | -9% |
| Texas | $943 | -8% |
| Florida | $974 | -5% |
| Ohio | $994 | -3% |
| Michigan | $1,025 | — |
| Pennsylvania | $1,056 | +3% |
| Illinois | $1,128 | +10% |
| New York | $1,230 | +20% |
| California | $1,251 | +22% |
See all 50 states on the main concrete calculator.
Frequently asked questions
How much does concrete cost in New York?
10×10 ft patio, 4 in thick, poured & finished costs about $900–$1,560 in New York (typical $1,230), compared with $1,025 at the US average. Your exact price depends on size, materials and your contractor — use the calculator above for your own numbers.
When is the best time to pour concrete in New York?
Spring through fall, roughly April–October, when temperatures stay above 40°F. Cold-weather pours are possible but need blankets and heated mix.
Is concrete cheaper in New York than in other states?
New York's construction cost index is 1.20, 20% above the US average and the 5th highest of the 50 states and DC. Among the 10 most populous states, New York ranks 9th cheapest for this project.
Does the estimate include sales tax?
No. Sales tax on materials in New York is 4% state rate plus local taxes — 8–8.875% in most places, including New York City. Contractors usually build it into their quotes, so compare quotes on the same basis.