Typical concrete costs in Michigan (2026)
Estimated cost (professionally poured & finished) for common projects in Michigan, next to the US average. Change any option in the calculator above to price your exact project.
| Project | Michigan range | Michigan typical | US typical |
|---|---|---|---|
| 10×10 ft patio, 4 in | $750 – $1,300 | $1,025 | $1,025 |
| 12×16 ft patio, 4 in | $1,440 – $2,496 | $1,968 | $1,968 |
| 12×40 ft driveway, 4 in | $3,600 – $6,240 | $4,920 | $4,920 |
| 24×24 ft garage slab, 4 in | $4,320 – $7,488 | $5,904 | $5,904 |
What changes the price in Michigan
Michigan's climate: long, snowy winters with deep frost and warm summers. These local factors matter most for concrete projects:
- Order air-entrained concrete for anything outdoors. Michigan freeze–thaw cycles crack and flake plain concrete, so a 4,000 psi air-entrained mix is the standard exterior order here.
- Footings and post holes go below the frost line — about 42 in across most of the Lower Peninsula and deeper in the Upper Peninsula. Deeper holes mean more concrete than the national rule of thumb.
- Skip rock salt the first winter. De-icing salt scales young concrete; use sand for traction until the slab is a year old.
- Pouring season is roughly April–October. Cold-weather pours need insulated blankets and heated mix, which contractors charge extra for.
Labor, sales tax and permits in Michigan
- Labor and prices: Michigan's construction cost index is 1.00 — right at the US average, the 23rd highest of the 50 states and DC. Prices in big metros (Detroit, Grand Rapids, Lansing) usually run above the state average, and rural areas below it.
- Sales tax: a flat 6% statewide — Michigan has no local sales taxes. The estimates on this page don't include it.
- Building rules: Michigan follows the Michigan Residential Code, which applies statewide and is based on the IRC. Permits and inspections are handled by your city or county, so confirm requirements with your local building department before you start.
Michigan vs. other large states
10×10 ft patio, 4 in thick, poured & finished — typical cost in the 10 most populous states:
| State | Typical cost | vs. US avg |
|---|---|---|
| North Carolina | $912 | -11% |
| Georgia | $933 | -9% |
| Texas | $943 | -8% |
| Florida | $974 | -5% |
| Ohio | $994 | -3% |
| Michigan | $1,025 | — |
| Pennsylvania | $1,056 | +3% |
| Illinois | $1,128 | +10% |
| New York | $1,230 | +20% |
| California | $1,251 | +22% |
See all 50 states on the main concrete calculator.
Frequently asked questions
How much does concrete cost in Michigan?
10×10 ft patio, 4 in thick, poured & finished costs about $750–$1,300 in Michigan (typical $1,025), compared with $1,025 at the US average. Your exact price depends on size, materials and your contractor — use the calculator above for your own numbers.
When is the best time to pour concrete in Michigan?
Spring through fall, roughly April–October, when temperatures stay above 40°F. Cold-weather pours are possible but need blankets and heated mix.
Is concrete cheaper in Michigan than in other states?
Michigan's construction cost index is 1.00, right at the US average and the 23rd highest of the 50 states and DC. Among the 10 most populous states, Michigan ranks 6th cheapest for this project.
Does the estimate include sales tax?
No. Sales tax on materials in Michigan is a flat 6% statewide — Michigan has no local sales taxes. Contractors usually build it into their quotes, so compare quotes on the same basis.