Typical concrete costs in Florida (2026)
Estimated cost (professionally poured & finished) for common projects in Florida, next to the US average. Change any option in the calculator above to price your exact project.
| Project | Florida range | Florida typical | US typical |
|---|---|---|---|
| 10×10 ft patio, 4 in | $713 – $1,235 | $974 | $1,025 |
| 12×16 ft patio, 4 in | $1,368 – $2,371 | $1,870 | $1,968 |
| 12×40 ft driveway, 4 in | $3,420 – $5,928 | $4,674 | $4,920 |
| 24×24 ft garage slab, 4 in | $4,104 – $7,114 | $5,609 | $5,904 |
What changes the price in Florida
Florida's climate: hot and humid year-round, with a June–November hurricane season. These local factors matter most for concrete projects:
- Heat speeds up setting. In Florida's summer heat, crews pour early in the morning and keep the slab wet while it cures — ask whether curing is included in the quote.
- No frost line, but watch the soil. Florida slabs sit on compacted sand or fill; a solid base of limerock prevents settling. New home foundations must also include termite protection under the Florida Building Code.
Labor, sales tax and permits in Florida
- Labor and prices: Florida's construction cost index is 0.95 — 5% below the US average, the 31st highest of the 50 states and DC. Prices in big metros (Miami, Tampa, Orlando) usually run above the state average, and rural areas below it.
- Sales tax: 6% state rate plus a county surtax in most counties (usually 0.5–1.5%). The estimates on this page don't include it.
- Building rules: Florida follows the Florida Building Code, which applies statewide and includes strict wind-load rules. Permits and inspections are handled by your city or county, so confirm requirements with your local building department before you start.
Florida vs. other large states
10×10 ft patio, 4 in thick, poured & finished — typical cost in the 10 most populous states:
| State | Typical cost | vs. US avg |
|---|---|---|
| North Carolina | $912 | -11% |
| Georgia | $933 | -9% |
| Texas | $943 | -8% |
| Florida | $974 | -5% |
| Ohio | $994 | -3% |
| Michigan | $1,025 | — |
| Pennsylvania | $1,056 | +3% |
| Illinois | $1,128 | +10% |
| New York | $1,230 | +20% |
| California | $1,251 | +22% |
See all 50 states on the main concrete calculator.
Frequently asked questions
How much does concrete cost in Florida?
10×10 ft patio, 4 in thick, poured & finished costs about $713–$1,235 in Florida (typical $974), compared with $1,025 at the US average. Your exact price depends on size, materials and your contractor — use the calculator above for your own numbers.
When is the best time to pour concrete in Florida?
Almost any time of year. In summer, pour early in the morning so the concrete doesn't set too fast in the heat.
Is concrete cheaper in Florida than in other states?
Florida's construction cost index is 0.95, 5% below the US average and the 31st highest of the 50 states and DC. Among the 10 most populous states, Florida ranks 4th cheapest for this project.
Does the estimate include sales tax?
No. Sales tax on materials in Florida is 6% state rate plus a county surtax in most counties (usually 0.5–1.5%). Contractors usually build it into their quotes, so compare quotes on the same basis.