Typical concrete costs in Pennsylvania (2026)
Estimated cost (professionally poured & finished) for common projects in Pennsylvania, next to the US average. Change any option in the calculator above to price your exact project.
| Project | Pennsylvania range | Pennsylvania typical | US typical |
|---|---|---|---|
| 10×10 ft patio, 4 in | $773 – $1,339 | $1,056 | $1,025 |
| 12×16 ft patio, 4 in | $1,483 – $2,571 | $2,027 | $1,968 |
| 12×40 ft driveway, 4 in | $3,708 – $6,427 | $5,068 | $4,920 |
| 24×24 ft garage slab, 4 in | $4,450 – $7,713 | $6,081 | $5,904 |
What changes the price in Pennsylvania
Pennsylvania's climate: cold winters with regular freeze–thaw cycles and warm, humid summers. These local factors matter most for concrete projects:
- Order air-entrained concrete for anything outdoors. Pennsylvania freeze–thaw cycles crack and flake plain concrete, so a 4,000 psi air-entrained mix is the standard exterior order here.
- Footings and post holes go below the frost line — roughly 30–42 in depending on the municipality. Deeper holes mean more concrete than the national rule of thumb.
- Skip rock salt the first winter. De-icing salt scales young concrete; use sand for traction until the slab is a year old.
- Pouring season is roughly April–October. Cold-weather pours need insulated blankets and heated mix, which contractors charge extra for.
Labor, sales tax and permits in Pennsylvania
- Labor and prices: Pennsylvania's construction cost index is 1.03 — 3% above the US average, the 18th highest of the 50 states and DC. Prices in big metros (Philadelphia, Pittsburgh, Allentown) usually run above the state average, and rural areas below it.
- Sales tax: 6% state rate; 7% in Allegheny County (Pittsburgh) and 8% in Philadelphia. The estimates on this page don't include it.
- Building rules: Pennsylvania follows the Pennsylvania Uniform Construction Code (UCC), which applies statewide and is based on the IRC. Permits and inspections are handled by your city or county, so confirm requirements with your local building department before you start.
Pennsylvania vs. other large states
10×10 ft patio, 4 in thick, poured & finished — typical cost in the 10 most populous states:
| State | Typical cost | vs. US avg |
|---|---|---|
| North Carolina | $912 | -11% |
| Georgia | $933 | -9% |
| Texas | $943 | -8% |
| Florida | $974 | -5% |
| Ohio | $994 | -3% |
| Michigan | $1,025 | — |
| Pennsylvania | $1,056 | +3% |
| Illinois | $1,128 | +10% |
| New York | $1,230 | +20% |
| California | $1,251 | +22% |
See all 50 states on the main concrete calculator.
Frequently asked questions
How much does concrete cost in Pennsylvania?
10×10 ft patio, 4 in thick, poured & finished costs about $773–$1,339 in Pennsylvania (typical $1,056), compared with $1,025 at the US average. Your exact price depends on size, materials and your contractor — use the calculator above for your own numbers.
When is the best time to pour concrete in Pennsylvania?
Spring through fall, roughly April–October, when temperatures stay above 40°F. Cold-weather pours are possible but need blankets and heated mix.
Is concrete cheaper in Pennsylvania than in other states?
Pennsylvania's construction cost index is 1.03, 3% above the US average and the 18th highest of the 50 states and DC. Among the 10 most populous states, Pennsylvania ranks 7th cheapest for this project.
Does the estimate include sales tax?
No. Sales tax on materials in Pennsylvania is 6% state rate; 7% in Allegheny County (Pittsburgh) and 8% in Philadelphia. Contractors usually build it into their quotes, so compare quotes on the same basis.