Typical gravel costs in Pennsylvania (2026)
Estimated cost (bulk, delivered) for common projects in Pennsylvania, next to the US average. Change any option in the calculator above to price your exact project.
| Project | Pennsylvania range | Pennsylvania typical | US typical |
|---|---|---|---|
| Garden path, 3×30 ft, 3 in | $103 – $230 | $166 | $165 |
| Driveway section, 10×40 ft, 4 in | $251 – $492 | $371 | $367 |
| Full driveway, 12×60 ft, 6 in | $573 – $1,069 | $821 | $812 |
| Mulch beds, 200 sq ft, 3 in | $108 – $236 | $172 | $170 |
What changes the price in Pennsylvania
Pennsylvania's climate: cold winters with regular freeze–thaw cycles and warm, humid summers. These local factors matter most for gravel projects:
- Ask for 2A modified. That's the crushed stone and fines blend ("2A mod") Pennsylvania quarries sell as driveway and paver base. It packs hard and is the standard driveway base in Pennsylvania.
- Local stone is cheapest. In Pennsylvania, crushed limestone is the most common stone. Stone hauled in from out of state costs noticeably more.
- Build a deeper base. Use 6–8 in of compacted base on driveways — thin gravel heaves and ruts after freeze–thaw and snowplowing. Raise the plow shoes so the blade doesn't scrape up the stone.
Labor, sales tax and permits in Pennsylvania
- Labor and prices: Pennsylvania's construction cost index is 1.03 — 3% above the US average, the 18th highest of the 50 states and DC. Prices in big metros (Philadelphia, Pittsburgh, Allentown) usually run above the state average, and rural areas below it.
- Sales tax: 6% state rate; 7% in Allegheny County (Pittsburgh) and 8% in Philadelphia. The estimates on this page don't include it.
- Building rules: Pennsylvania follows the Pennsylvania Uniform Construction Code (UCC), which applies statewide and is based on the IRC. Permits and inspections are handled by your city or county, so confirm requirements with your local building department before you start.
Pennsylvania vs. other large states
40×10 ft crushed stone driveway section, 4 in deep, delivered — typical cost in the 10 most populous states:
| State | Typical cost | vs. US avg |
|---|---|---|
| North Carolina | $351 | -4% |
| Georgia | $354 | -4% |
| Texas | $355 | -3% |
| Florida | $359 | -2% |
| Ohio | $362 | -1% |
| Michigan | $367 | — |
| Pennsylvania | $371 | +1% |
| Illinois | $381 | +4% |
| New York | $396 | +8% |
| California | $399 | +9% |
See all 50 states on the main gravel & mulch calculator.
Frequently asked questions
How much does gravel cost in Pennsylvania?
40×10 ft crushed stone driveway section, 4 in deep, delivered costs about $251–$492 in Pennsylvania (typical $371), compared with $367 at the US average. Your exact price depends on size, materials and your contractor — use the calculator above for your own numbers.
What is the best driveway gravel base in Pennsylvania?
Ask local suppliers for 2A modified — the crushed stone and fines blend ("2A mod") Pennsylvania quarries sell as driveway and paver base. It compacts into a hard base. Top it with a clean stone like #57 if you want a looser gravel surface.
Is gravel cheaper in Pennsylvania than in other states?
Pennsylvania's construction cost index is 1.03, 3% above the US average and the 18th highest of the 50 states and DC. Among the 10 most populous states, Pennsylvania ranks 7th cheapest for this project.
Does the estimate include sales tax?
No. Sales tax on materials in Pennsylvania is 6% state rate; 7% in Allegheny County (Pittsburgh) and 8% in Philadelphia. Contractors usually build it into their quotes, so compare quotes on the same basis.