Typical gravel costs in Ohio (2026)
Estimated cost (bulk, delivered) for common projects in Ohio, next to the US average. Change any option in the calculator above to price your exact project.
| Project | Ohio range | Ohio typical | US typical |
|---|---|---|---|
| Garden path, 3×30 ft, 3 in | $101 – $224 | $163 | $165 |
| Driveway section, 10×40 ft, 4 in | $245 – $480 | $362 | $367 |
| Full driveway, 12×60 ft, 6 in | $560 – $1,044 | $802 | $812 |
| Mulch beds, 200 sq ft, 3 in | $105 – $231 | $168 | $170 |
What changes the price in Ohio
Ohio's climate: cold winters with lake-effect snow in the northeast and humid summers. These local factors matter most for gravel projects:
- Ask for #304 limestone. That's the ODOT 304 crushed limestone base Ohio suppliers sell for driveways. It packs hard and is the standard driveway base in Ohio.
- Local stone is cheapest. In Ohio, crushed limestone is the local staple. Stone hauled in from out of state costs noticeably more.
- Build a deeper base. Use 6–8 in of compacted base on driveways — thin gravel heaves and ruts after freeze–thaw and snowplowing. Raise the plow shoes so the blade doesn't scrape up the stone.
Labor, sales tax and permits in Ohio
- Labor and prices: Ohio's construction cost index is 0.97 — 3% below the US average, the 25th highest of the 50 states and DC. Prices in big metros (Columbus, Cleveland, Cincinnati) usually run above the state average, and rural areas below it.
- Sales tax: 5.75% state rate plus a county tax, usually 6.75–8% in total. The estimates on this page don't include it.
- Building rules: Ohio follows the Residential Code of Ohio, which applies statewide to one-, two- and three-family homes. Permits and inspections are handled by your city or county, so confirm requirements with your local building department before you start.
Ohio vs. other large states
40×10 ft crushed stone driveway section, 4 in deep, delivered — typical cost in the 10 most populous states:
| State | Typical cost | vs. US avg |
|---|---|---|
| North Carolina | $351 | -4% |
| Georgia | $354 | -4% |
| Texas | $355 | -3% |
| Florida | $359 | -2% |
| Ohio | $362 | -1% |
| Michigan | $367 | — |
| Pennsylvania | $371 | +1% |
| Illinois | $381 | +4% |
| New York | $396 | +8% |
| California | $399 | +9% |
See all 50 states on the main gravel & mulch calculator.
Frequently asked questions
How much does gravel cost in Ohio?
40×10 ft crushed stone driveway section, 4 in deep, delivered costs about $245–$480 in Ohio (typical $362), compared with $367 at the US average. Your exact price depends on size, materials and your contractor — use the calculator above for your own numbers.
What is the best driveway gravel base in Ohio?
Ask local suppliers for #304 limestone — the ODOT 304 crushed limestone base Ohio suppliers sell for driveways. It compacts into a hard base. Top it with a clean stone like #57 if you want a looser gravel surface.
Is gravel cheaper in Ohio than in other states?
Ohio's construction cost index is 0.97, 3% below the US average and the 25th highest of the 50 states and DC. Among the 10 most populous states, Ohio ranks 5th cheapest for this project.
Does the estimate include sales tax?
No. Sales tax on materials in Ohio is 5.75% state rate plus a county tax, usually 6.75–8% in total. Contractors usually build it into their quotes, so compare quotes on the same basis.