Typical concrete costs in Ohio (2026)
Estimated cost (professionally poured & finished) for common projects in Ohio, next to the US average. Change any option in the calculator above to price your exact project.
| Project | Ohio range | Ohio typical | US typical |
|---|---|---|---|
| 10×10 ft patio, 4 in | $728 – $1,261 | $994 | $1,025 |
| 12×16 ft patio, 4 in | $1,397 – $2,421 | $1,909 | $1,968 |
| 12×40 ft driveway, 4 in | $3,492 – $6,053 | $4,772 | $4,920 |
| 24×24 ft garage slab, 4 in | $4,190 – $7,263 | $5,727 | $5,904 |
What changes the price in Ohio
Ohio's climate: cold winters with lake-effect snow in the northeast and humid summers. These local factors matter most for concrete projects:
- Order air-entrained concrete for anything outdoors. Ohio freeze–thaw cycles crack and flake plain concrete, so a 4,000 psi air-entrained mix is the standard exterior order here.
- Footings and post holes go below the frost line — about 32 in in southern Ohio and 36–42 in in the north. Deeper holes mean more concrete than the national rule of thumb.
- Skip rock salt the first winter. De-icing salt scales young concrete; use sand for traction until the slab is a year old.
- Pouring season is roughly April–October. Cold-weather pours need insulated blankets and heated mix, which contractors charge extra for.
Labor, sales tax and permits in Ohio
- Labor and prices: Ohio's construction cost index is 0.97 — 3% below the US average, the 25th highest of the 50 states and DC. Prices in big metros (Columbus, Cleveland, Cincinnati) usually run above the state average, and rural areas below it.
- Sales tax: 5.75% state rate plus a county tax, usually 6.75–8% in total. The estimates on this page don't include it.
- Building rules: Ohio follows the Residential Code of Ohio, which applies statewide to one-, two- and three-family homes. Permits and inspections are handled by your city or county, so confirm requirements with your local building department before you start.
Ohio vs. other large states
10×10 ft patio, 4 in thick, poured & finished — typical cost in the 10 most populous states:
| State | Typical cost | vs. US avg |
|---|---|---|
| North Carolina | $912 | -11% |
| Georgia | $933 | -9% |
| Texas | $943 | -8% |
| Florida | $974 | -5% |
| Ohio | $994 | -3% |
| Michigan | $1,025 | — |
| Pennsylvania | $1,056 | +3% |
| Illinois | $1,128 | +10% |
| New York | $1,230 | +20% |
| California | $1,251 | +22% |
See all 50 states on the main concrete calculator.
Frequently asked questions
How much does concrete cost in Ohio?
10×10 ft patio, 4 in thick, poured & finished costs about $728–$1,261 in Ohio (typical $994), compared with $1,025 at the US average. Your exact price depends on size, materials and your contractor — use the calculator above for your own numbers.
When is the best time to pour concrete in Ohio?
Spring through fall, roughly April–October, when temperatures stay above 40°F. Cold-weather pours are possible but need blankets and heated mix.
Is concrete cheaper in Ohio than in other states?
Ohio's construction cost index is 0.97, 3% below the US average and the 25th highest of the 50 states and DC. Among the 10 most populous states, Ohio ranks 5th cheapest for this project.
Does the estimate include sales tax?
No. Sales tax on materials in Ohio is 5.75% state rate plus a county tax, usually 6.75–8% in total. Contractors usually build it into their quotes, so compare quotes on the same basis.