Typical concrete costs in Texas (2026)
Estimated cost (professionally poured & finished) for common projects in Texas, next to the US average. Change any option in the calculator above to price your exact project.
| Project | Texas range | Texas typical | US typical |
|---|---|---|---|
| 10×10 ft patio, 4 in | $690 – $1,196 | $943 | $1,025 |
| 12×16 ft patio, 4 in | $1,325 – $2,296 | $1,811 | $1,968 |
| 12×40 ft driveway, 4 in | $3,312 – $5,741 | $4,526 | $4,920 |
| 24×24 ft garage slab, 4 in | $3,974 – $6,889 | $5,432 | $5,904 |
What changes the price in Texas
Texas's climate: hot and humid in the east and along the Gulf, hot and dry in the west, with frequent spring hail. These local factors matter most for concrete projects:
- Heat speeds up setting. In Texas's summer heat, crews pour early in the morning and keep the slab wet while it cures — ask whether curing is included in the quote.
- Plan for clay soil. Much of the Dallas, Houston and Austin areas sit on expansive clay that swells and shrinks with rain. A thicker compacted base of flex base and rebar instead of wire mesh cost more up front but prevent cracked driveways.
- Frost depth is shallow — minimal in South Texas and along the coast; roughly 6–24 in across North Texas and the Panhandle — so footings and post holes are cheaper here than in northern states.
Labor, sales tax and permits in Texas
- Labor and prices: Texas's construction cost index is 0.92 — 8% below the US average, the 39th highest of the 50 states and DC. Prices in big metros (Houston, Dallas–Fort Worth, San Antonio) usually run above the state average, and rural areas below it.
- Sales tax: 6.25% state rate, up to 8.25% with local taxes. The estimates on this page don't include it.
- Building rules: Texas follows the International Residential Code inside city limits (many unincorporated county areas have little or no residential code, though HOA rules still apply). Permits and inspections are handled by your city or county, so confirm requirements with your local building department before you start.
Texas vs. other large states
10×10 ft patio, 4 in thick, poured & finished — typical cost in the 10 most populous states:
| State | Typical cost | vs. US avg |
|---|---|---|
| North Carolina | $912 | -11% |
| Georgia | $933 | -9% |
| Texas | $943 | -8% |
| Florida | $974 | -5% |
| Ohio | $994 | -3% |
| Michigan | $1,025 | — |
| Pennsylvania | $1,056 | +3% |
| Illinois | $1,128 | +10% |
| New York | $1,230 | +20% |
| California | $1,251 | +22% |
See all 50 states on the main concrete calculator.
Frequently asked questions
How much does concrete cost in Texas?
10×10 ft patio, 4 in thick, poured & finished costs about $690–$1,196 in Texas (typical $943), compared with $1,025 at the US average. Your exact price depends on size, materials and your contractor — use the calculator above for your own numbers.
When is the best time to pour concrete in Texas?
Almost any time of year. In summer, pour early in the morning so the concrete doesn't set too fast in the heat.
Is concrete cheaper in Texas than in other states?
Texas's construction cost index is 0.92, 8% below the US average and the 39th highest of the 50 states and DC. Among the 10 most populous states, Texas ranks 3rd cheapest for this project.
Does the estimate include sales tax?
No. Sales tax on materials in Texas is 6.25% state rate, up to 8.25% with local taxes. Contractors usually build it into their quotes, so compare quotes on the same basis.