Typical concrete costs in North Carolina (2026)
Estimated cost (professionally poured & finished) for common projects in North Carolina, next to the US average. Change any option in the calculator above to price your exact project.
| Project | North Carolina range | North Carolina typical | US typical |
|---|---|---|---|
| 10×10 ft patio, 4 in | $668 – $1,157 | $912 | $1,025 |
| 12×16 ft patio, 4 in | $1,282 – $2,221 | $1,752 | $1,968 |
| 12×40 ft driveway, 4 in | $3,204 – $5,554 | $4,379 | $4,920 |
| 24×24 ft garage slab, 4 in | $3,845 – $6,664 | $5,255 | $5,904 |
What changes the price in North Carolina
North Carolina's climate: humid, with mild winters in the east, colder mountain winters, and hurricanes on the coast. These local factors matter most for concrete projects:
- Heat speeds up setting. In North Carolina's summer heat, crews pour early in the morning and keep the slab wet while it cures — ask whether curing is included in the quote.
- Frost depth is shallow — about 12 in on the coast and in the Piedmont, and 18–24 in in the mountains — so footings and post holes are cheaper here than in northern states.
Labor, sales tax and permits in North Carolina
- Labor and prices: North Carolina's construction cost index is 0.89 — 11% below the US average, the 46th highest of the 50 states and DC. Prices in big metros (Charlotte, Raleigh, Greensboro) usually run above the state average, and rural areas below it.
- Sales tax: 4.75% state rate plus county taxes, usually 6.75–7.5% in total. The estimates on this page don't include it.
- Building rules: North Carolina follows the North Carolina State Building Code: Residential Code, which applies statewide. Permits and inspections are handled by your city or county, so confirm requirements with your local building department before you start.
North Carolina vs. other large states
10×10 ft patio, 4 in thick, poured & finished — typical cost in the 10 most populous states:
| State | Typical cost | vs. US avg |
|---|---|---|
| North Carolina | $912 | -11% |
| Georgia | $933 | -9% |
| Texas | $943 | -8% |
| Florida | $974 | -5% |
| Ohio | $994 | -3% |
| Michigan | $1,025 | — |
| Pennsylvania | $1,056 | +3% |
| Illinois | $1,128 | +10% |
| New York | $1,230 | +20% |
| California | $1,251 | +22% |
See all 50 states on the main concrete calculator.
Frequently asked questions
How much does concrete cost in North Carolina?
10×10 ft patio, 4 in thick, poured & finished costs about $668–$1,157 in North Carolina (typical $912), compared with $1,025 at the US average. Your exact price depends on size, materials and your contractor — use the calculator above for your own numbers.
When is the best time to pour concrete in North Carolina?
Almost any time of year. In summer, pour early in the morning so the concrete doesn't set too fast in the heat.
Is concrete cheaper in North Carolina than in other states?
North Carolina's construction cost index is 0.89, 11% below the US average and the 46th highest of the 50 states and DC. Among the 10 most populous states, North Carolina ranks 1st cheapest for this project.
Does the estimate include sales tax?
No. Sales tax on materials in North Carolina is 4.75% state rate plus county taxes, usually 6.75–7.5% in total. Contractors usually build it into their quotes, so compare quotes on the same basis.