Typical tile installation costs in North Carolina (2026)
Estimated cost (porcelain tile, installed) for common projects in North Carolina, next to the US average. Change any option in the calculator above to price your exact project.
| Project | North Carolina range | North Carolina typical | US typical |
|---|---|---|---|
| Ceramic, 10×8 ft floor | $643 – $1,490 | $1,066 | $1,171 |
| Porcelain, 10×8 ft floor | $735 – $1,765 | $1,250 | $1,363 |
| Natural stone, 10×8 ft floor | $1,010 – $2,407 | $1,709 | $1,843 |
| Porcelain, 15×12 ft kitchen | $1,610 – $3,855 | $2,732 | $2,983 |
What changes the price in North Carolina
North Carolina's climate: humid, with mild winters in the east, colder mountain winters, and hurricanes on the coast. These local factors matter most for tile installation projects:
- Outdoor tile works year-round here. No freeze–thaw rating is needed, but choose a textured, slip-resistant porcelain for pool decks and patios.
- Waterproof the shower properly. In humid climates, use a waterproofing membrane behind shower tile and a stain- and mildew-resistant grout.
Labor, sales tax and permits in North Carolina
- Labor and prices: North Carolina's construction cost index is 0.89 — 11% below the US average, the 46th highest of the 50 states and DC. Prices in big metros (Charlotte, Raleigh, Greensboro) usually run above the state average, and rural areas below it.
- Sales tax: 4.75% state rate plus county taxes, usually 6.75–7.5% in total. The estimates on this page don't include it.
- Building rules: North Carolina follows the North Carolina State Building Code: Residential Code, which applies statewide. Permits and inspections are handled by your city or county, so confirm requirements with your local building department before you start.
North Carolina vs. other large states
Tiling a 10×8 ft bathroom floor with 12×24 porcelain — typical cost in the 10 most populous states:
| State | Typical cost | vs. US avg |
|---|---|---|
| North Carolina | $1,250 | -8% |
| Georgia | $1,270 | -7% |
| Texas | $1,281 | -6% |
| Florida | $1,311 | -4% |
| Ohio | $1,332 | -2% |
| Michigan | $1,363 | — |
| Pennsylvania | $1,393 | +2% |
| Illinois | $1,465 | +8% |
| New York | $1,568 | +15% |
| California | $1,588 | +17% |
See all 50 states on the main tile calculator.
Frequently asked questions
How much does tile installation cost in North Carolina?
Tiling a 10×8 ft bathroom floor with 12×24 porcelain costs about $735–$1,765 in North Carolina (typical $1,250), compared with $1,363 at the US average. Your exact price depends on size, materials and your contractor — use the calculator above for your own numbers.
Do I need a permit for a tile project in North Carolina?
It depends on the scope. North Carolina follows the North Carolina State Building Code: Residential Code, which applies statewide. Small tile jobs often don't need a permit, but anything structural, electrical or plumbing-related usually does — check with your city or county building department.
Is tile installation cheaper in North Carolina than in other states?
North Carolina's construction cost index is 0.89, 11% below the US average and the 46th highest of the 50 states and DC. Among the 10 most populous states, North Carolina ranks 1st cheapest for this project.
Does the estimate include sales tax?
No. Sales tax on materials in North Carolina is 4.75% state rate plus county taxes, usually 6.75–7.5% in total. Contractors usually build it into their quotes, so compare quotes on the same basis.