Typical tile installation costs in Georgia (2026)
Estimated cost (porcelain tile, installed) for common projects in Georgia, next to the US average. Change any option in the calculator above to price your exact project.
| Project | Georgia range | Georgia typical | US typical |
|---|---|---|---|
| Ceramic, 10×8 ft floor | $655 – $1,515 | $1,085 | $1,171 |
| Porcelain, 10×8 ft floor | $748 – $1,793 | $1,270 | $1,363 |
| Natural stone, 10×8 ft floor | $1,025 – $2,441 | $1,733 | $1,843 |
| Porcelain, 15×12 ft kitchen | $1,639 – $3,917 | $2,778 | $2,983 |
What changes the price in Georgia
Georgia's climate: hot, humid summers and mild winters, with tropical storms on the coast. These local factors matter most for tile installation projects:
- Outdoor tile works year-round here. No freeze–thaw rating is needed, but choose a textured, slip-resistant porcelain for pool decks and patios.
- Waterproof the shower properly. In humid climates, use a waterproofing membrane behind shower tile and a stain- and mildew-resistant grout.
Labor, sales tax and permits in Georgia
- Labor and prices: Georgia's construction cost index is 0.91 — 9% below the US average, the 40th highest of the 50 states and DC. Prices in big metros (Atlanta, Augusta, Columbus) usually run above the state average, and rural areas below it.
- Sales tax: 4% state rate plus local taxes, usually 7–8.9% in total. The estimates on this page don't include it.
- Building rules: Georgia follows the Georgia State Minimum Standard Codes, based on the IRC with Georgia amendments. Permits and inspections are handled by your city or county, so confirm requirements with your local building department before you start.
Georgia vs. other large states
Tiling a 10×8 ft bathroom floor with 12×24 porcelain — typical cost in the 10 most populous states:
| State | Typical cost | vs. US avg |
|---|---|---|
| North Carolina | $1,250 | -8% |
| Georgia | $1,270 | -7% |
| Texas | $1,281 | -6% |
| Florida | $1,311 | -4% |
| Ohio | $1,332 | -2% |
| Michigan | $1,363 | — |
| Pennsylvania | $1,393 | +2% |
| Illinois | $1,465 | +8% |
| New York | $1,568 | +15% |
| California | $1,588 | +17% |
See all 50 states on the main tile calculator.
Frequently asked questions
How much does tile installation cost in Georgia?
Tiling a 10×8 ft bathroom floor with 12×24 porcelain costs about $748–$1,793 in Georgia (typical $1,270), compared with $1,363 at the US average. Your exact price depends on size, materials and your contractor — use the calculator above for your own numbers.
Do I need a permit for a tile project in Georgia?
It depends on the scope. Georgia follows the Georgia State Minimum Standard Codes, based on the IRC with Georgia amendments. Small tile jobs often don't need a permit, but anything structural, electrical or plumbing-related usually does — check with your city or county building department.
Is tile installation cheaper in Georgia than in other states?
Georgia's construction cost index is 0.91, 9% below the US average and the 40th highest of the 50 states and DC. Among the 10 most populous states, Georgia ranks 2nd cheapest for this project.
Does the estimate include sales tax?
No. Sales tax on materials in Georgia is 4% state rate plus local taxes, usually 7–8.9% in total. Contractors usually build it into their quotes, so compare quotes on the same basis.