Typical deck costs in Georgia (2026)
Estimated cost (complete deck, installed) for common projects in Georgia, next to the US average. Change any option in the calculator above to price your exact project.
| Project | Georgia range | Georgia typical | US typical |
|---|---|---|---|
| 12×12 ft pressure-treated | $4,505 – $7,961 | $6,233 | $6,849 |
| 16×12 ft pressure-treated | $5,870 – $10,341 | $8,105 | $8,907 |
| 16×12 ft composite | $10,456 – $17,927 | $14,191 | $15,595 |
| 20×16 ft composite | $16,244 – $27,664 | $21,954 | $24,125 |
What changes the price in Georgia
Georgia's climate: hot, humid summers and mild winters, with tropical storms on the coast. These local factors matter most for deck projects:
- Termites and rot. Termite risk here is high. Use ground-contact treated lumber for posts and framing near the soil.
- Humidity means more maintenance. Wood decks here need cleaning and sealing more often; composite or PVC costs more up front but saves years of upkeep.
- Most attached decks need a permit. Under the IRC, only small, low, freestanding decks (under 200 sq ft, under 30 in high and not serving an exit door) skip it.
Labor, sales tax and permits in Georgia
- Labor and prices: Georgia's construction cost index is 0.91 — 9% below the US average, the 40th highest of the 50 states and DC. Prices in big metros (Atlanta, Augusta, Columbus) usually run above the state average, and rural areas below it.
- Sales tax: 4% state rate plus local taxes, usually 7–8.9% in total. The estimates on this page don't include it.
- Building rules: Georgia follows the Georgia State Minimum Standard Codes, based on the IRC with Georgia amendments. Permits and inspections are handled by your city or county, so confirm requirements with your local building department before you start.
Georgia vs. other large states
16×12 ft pressure-treated deck with 40 ft of railing and 3 steps — typical cost in the 10 most populous states:
| State | Typical cost | vs. US avg |
|---|---|---|
| North Carolina | $7,927 | -11% |
| Georgia | $8,105 | -9% |
| Texas | $8,194 | -8% |
| Florida | $8,462 | -5% |
| Ohio | $8,640 | -3% |
| Michigan | $8,907 | — |
| Pennsylvania | $9,174 | +3% |
| Illinois | $9,798 | +10% |
| New York | $10,688 | +20% |
| California | $10,867 | +22% |
See all 50 states on the main deck cost calculator.
Frequently asked questions
How much does a new deck cost in Georgia?
16×12 ft pressure-treated deck with 40 ft of railing and 3 steps costs about $5,870–$10,341 in Georgia (typical $8,105), compared with $8,907 at the US average. Your exact price depends on size, materials and your contractor — use the calculator above for your own numbers.
How deep do deck footings need to be in Georgia?
Footings must go below the frost line — about 12 in in north Georgia and less in the south. Your local building department sets the exact depth for your address.
Is a new deck cheaper in Georgia than in other states?
Georgia's construction cost index is 0.91, 9% below the US average and the 40th highest of the 50 states and DC. Among the 10 most populous states, Georgia ranks 2nd cheapest for this project.
Does the estimate include sales tax?
No. Sales tax on materials in Georgia is 4% state rate plus local taxes, usually 7–8.9% in total. Contractors usually build it into their quotes, so compare quotes on the same basis.