Typical deck costs in Michigan (2026)
Estimated cost (complete deck, installed) for common projects in Michigan, next to the US average. Change any option in the calculator above to price your exact project.
| Project | Michigan range | Michigan typical | US typical |
|---|---|---|---|
| 12×12 ft pressure-treated | $4,950 – $8,748 | $6,849 | $6,849 |
| 16×12 ft pressure-treated | $6,450 – $11,364 | $8,907 | $8,907 |
| 16×12 ft composite | $11,490 – $19,700 | $15,595 | $15,595 |
| 20×16 ft composite | $17,850 – $30,400 | $24,125 | $24,125 |
What changes the price in Michigan
Michigan's climate: long, snowy winters with deep frost and warm summers. These local factors matter most for deck projects:
- Footings must reach below the frost line — about 42 in across most of the Lower Peninsula and deeper in the Upper Peninsula. Deep footings (or helical piles) are a bigger share of the cost here than in the South.
- Design for snow load. Decks here carry heavy snow, which can mean bigger beams or closer joist spacing than a southern deck.
- Most attached decks need a permit. Under the IRC, only small, low, freestanding decks (under 200 sq ft, under 30 in high and not serving an exit door) skip it.
Labor, sales tax and permits in Michigan
- Labor and prices: Michigan's construction cost index is 1.00 — right at the US average, the 23rd highest of the 50 states and DC. Prices in big metros (Detroit, Grand Rapids, Lansing) usually run above the state average, and rural areas below it.
- Sales tax: a flat 6% statewide — Michigan has no local sales taxes. The estimates on this page don't include it.
- Building rules: Michigan follows the Michigan Residential Code, which applies statewide and is based on the IRC. Permits and inspections are handled by your city or county, so confirm requirements with your local building department before you start.
Michigan vs. other large states
16×12 ft pressure-treated deck with 40 ft of railing and 3 steps — typical cost in the 10 most populous states:
| State | Typical cost | vs. US avg |
|---|---|---|
| North Carolina | $7,927 | -11% |
| Georgia | $8,105 | -9% |
| Texas | $8,194 | -8% |
| Florida | $8,462 | -5% |
| Ohio | $8,640 | -3% |
| Michigan | $8,907 | — |
| Pennsylvania | $9,174 | +3% |
| Illinois | $9,798 | +10% |
| New York | $10,688 | +20% |
| California | $10,867 | +22% |
See all 50 states on the main deck cost calculator.
Frequently asked questions
How much does a new deck cost in Michigan?
16×12 ft pressure-treated deck with 40 ft of railing and 3 steps costs about $6,450–$11,364 in Michigan (typical $8,907), compared with $8,907 at the US average. Your exact price depends on size, materials and your contractor — use the calculator above for your own numbers.
How deep do deck footings need to be in Michigan?
Footings must go below the frost line — about 42 in across most of the Lower Peninsula and deeper in the Upper Peninsula. Your local building department sets the exact depth for your address.
Is a new deck cheaper in Michigan than in other states?
Michigan's construction cost index is 1.00, right at the US average and the 23rd highest of the 50 states and DC. Among the 10 most populous states, Michigan ranks 6th cheapest for this project.
Does the estimate include sales tax?
No. Sales tax on materials in Michigan is a flat 6% statewide — Michigan has no local sales taxes. Contractors usually build it into their quotes, so compare quotes on the same basis.