Typical concrete costs in Georgia (2026)
Estimated cost (professionally poured & finished) for common projects in Georgia, next to the US average. Change any option in the calculator above to price your exact project.
| Project | Georgia range | Georgia typical | US typical |
|---|---|---|---|
| 10×10 ft patio, 4 in | $683 – $1,183 | $933 | $1,025 |
| 12×16 ft patio, 4 in | $1,310 – $2,271 | $1,791 | $1,968 |
| 12×40 ft driveway, 4 in | $3,276 – $5,678 | $4,477 | $4,920 |
| 24×24 ft garage slab, 4 in | $3,931 – $6,814 | $5,373 | $5,904 |
What changes the price in Georgia
Georgia's climate: hot, humid summers and mild winters, with tropical storms on the coast. These local factors matter most for concrete projects:
- Heat speeds up setting. In Georgia's summer heat, crews pour early in the morning and keep the slab wet while it cures — ask whether curing is included in the quote.
- Frost depth is shallow — about 12 in in north Georgia and less in the south — so footings and post holes are cheaper here than in northern states.
Labor, sales tax and permits in Georgia
- Labor and prices: Georgia's construction cost index is 0.91 — 9% below the US average, the 40th highest of the 50 states and DC. Prices in big metros (Atlanta, Augusta, Columbus) usually run above the state average, and rural areas below it.
- Sales tax: 4% state rate plus local taxes, usually 7–8.9% in total. The estimates on this page don't include it.
- Building rules: Georgia follows the Georgia State Minimum Standard Codes, based on the IRC with Georgia amendments. Permits and inspections are handled by your city or county, so confirm requirements with your local building department before you start.
Georgia vs. other large states
10×10 ft patio, 4 in thick, poured & finished — typical cost in the 10 most populous states:
| State | Typical cost | vs. US avg |
|---|---|---|
| North Carolina | $912 | -11% |
| Georgia | $933 | -9% |
| Texas | $943 | -8% |
| Florida | $974 | -5% |
| Ohio | $994 | -3% |
| Michigan | $1,025 | — |
| Pennsylvania | $1,056 | +3% |
| Illinois | $1,128 | +10% |
| New York | $1,230 | +20% |
| California | $1,251 | +22% |
See all 50 states on the main concrete calculator.
Frequently asked questions
How much does concrete cost in Georgia?
10×10 ft patio, 4 in thick, poured & finished costs about $683–$1,183 in Georgia (typical $933), compared with $1,025 at the US average. Your exact price depends on size, materials and your contractor — use the calculator above for your own numbers.
When is the best time to pour concrete in Georgia?
Almost any time of year. In summer, pour early in the morning so the concrete doesn't set too fast in the heat.
Is concrete cheaper in Georgia than in other states?
Georgia's construction cost index is 0.91, 9% below the US average and the 40th highest of the 50 states and DC. Among the 10 most populous states, Georgia ranks 2nd cheapest for this project.
Does the estimate include sales tax?
No. Sales tax on materials in Georgia is 4% state rate plus local taxes, usually 7–8.9% in total. Contractors usually build it into their quotes, so compare quotes on the same basis.