Typical drywall costs in Texas (2026)
Estimated cost (hung, taped & finished (pro)) for common projects in Texas, next to the US average. Change any option in the calculator above to price your exact project.
| Project | Texas range | Texas typical | US typical |
|---|---|---|---|
| 10×10 ft room | $707 – $1,236 | $972 | $1,056 |
| 14×12 ft room | $1,008 – $1,765 | $1,386 | $1,507 |
| 20×15 ft room | $1,450 – $2,537 | $1,994 | $2,167 |
What changes the price in Texas
Texas's climate: hot and humid in the east and along the Gulf, hot and dry in the west, with frequent spring hail. These local factors matter most for drywall projects:
- Use mold-resistant board. In Texas's humidity, use paper-free or mold-resistant drywall in bathrooms, laundry rooms and anywhere moisture lingers.
- Clay soil means drywall cracks. Foundation movement on expansive clay often cracks drywall at door and window corners — a cheap patch, but cracks that keep coming back are worth a foundation check.
- Humidity slows the mud. Joint compound takes longer to dry in humid weather — run the AC or a dehumidifier so each coat is dry before the next.
- After flooding, cut above the water line. Wet drywall is usually removed at least 12 in above the high-water mark (a "flood cut") and replaced — pricing is often by the linear foot.
Labor, sales tax and permits in Texas
- Labor and prices: Texas's construction cost index is 0.92 — 8% below the US average, the 39th highest of the 50 states and DC. Prices in big metros (Houston, Dallas–Fort Worth, San Antonio) usually run above the state average, and rural areas below it.
- Sales tax: 6.25% state rate, up to 8.25% with local taxes. The estimates on this page don't include it.
- Building rules: Texas follows the International Residential Code inside city limits (many unincorporated county areas have little or no residential code, though HOA rules still apply). Permits and inspections are handled by your city or county, so confirm requirements with your local building department before you start.
Texas vs. other large states
Hanging and finishing a 14×12 ft room (walls + ceiling) — typical cost in the 10 most populous states:
| State | Typical cost | vs. US avg |
|---|---|---|
| North Carolina | $1,341 | -11% |
| Georgia | $1,371 | -9% |
| Texas | $1,386 | -8% |
| Florida | $1,432 | -5% |
| Ohio | $1,462 | -3% |
| Michigan | $1,507 | — |
| Pennsylvania | $1,552 | +3% |
| Illinois | $1,658 | +10% |
| New York | $1,808 | +20% |
| California | $1,839 | +22% |
See all 50 states on the main drywall calculator.
Frequently asked questions
How much does drywall cost in Texas?
Hanging and finishing a 14×12 ft room (walls + ceiling) costs about $1,008–$1,765 in Texas (typical $1,386), compared with $1,507 at the US average. Your exact price depends on size, materials and your contractor — use the calculator above for your own numbers.
Do I need a permit for a drywall project in Texas?
It depends on the scope. Texas follows the International Residential Code inside city limits (many unincorporated county areas have little or no residential code, though HOA rules still apply). Small drywall jobs often don't need a permit, but anything structural, electrical or plumbing-related usually does — check with your city or county building department.
Is drywall cheaper in Texas than in other states?
Texas's construction cost index is 0.92, 8% below the US average and the 39th highest of the 50 states and DC. Among the 10 most populous states, Texas ranks 3rd cheapest for this project.
Does the estimate include sales tax?
No. Sales tax on materials in Texas is 6.25% state rate, up to 8.25% with local taxes. Contractors usually build it into their quotes, so compare quotes on the same basis.