Typical drywall costs in Pennsylvania (2026)
Estimated cost (hung, taped & finished (pro)) for common projects in Pennsylvania, next to the US average. Change any option in the calculator above to price your exact project.
| Project | Pennsylvania range | Pennsylvania typical | US typical |
|---|---|---|---|
| 10×10 ft room | $791 – $1,384 | $1,088 | $1,056 |
| 14×12 ft room | $1,129 – $1,976 | $1,552 | $1,507 |
| 20×15 ft room | $1,623 – $2,841 | $2,232 | $2,167 |
What changes the price in Pennsylvania
Pennsylvania's climate: cold winters with regular freeze–thaw cycles and warm, humid summers. These local factors matter most for drywall projects:
- Basements need moisture-resistant board and a small gap above the concrete floor so the drywall doesn't wick water.
- Older homes often have plaster walls. Patching plaster and lath costs more per square foot than drywall, and full replacement adds demolition and disposal.
Labor, sales tax and permits in Pennsylvania
- Labor and prices: Pennsylvania's construction cost index is 1.03 — 3% above the US average, the 18th highest of the 50 states and DC. Prices in big metros (Philadelphia, Pittsburgh, Allentown) usually run above the state average, and rural areas below it.
- Sales tax: 6% state rate; 7% in Allegheny County (Pittsburgh) and 8% in Philadelphia. The estimates on this page don't include it.
- Building rules: Pennsylvania follows the Pennsylvania Uniform Construction Code (UCC), which applies statewide and is based on the IRC. Permits and inspections are handled by your city or county, so confirm requirements with your local building department before you start.
Pennsylvania vs. other large states
Hanging and finishing a 14×12 ft room (walls + ceiling) — typical cost in the 10 most populous states:
| State | Typical cost | vs. US avg |
|---|---|---|
| North Carolina | $1,341 | -11% |
| Georgia | $1,371 | -9% |
| Texas | $1,386 | -8% |
| Florida | $1,432 | -5% |
| Ohio | $1,462 | -3% |
| Michigan | $1,507 | — |
| Pennsylvania | $1,552 | +3% |
| Illinois | $1,658 | +10% |
| New York | $1,808 | +20% |
| California | $1,839 | +22% |
See all 50 states on the main drywall calculator.
Frequently asked questions
How much does drywall cost in Pennsylvania?
Hanging and finishing a 14×12 ft room (walls + ceiling) costs about $1,129–$1,976 in Pennsylvania (typical $1,552), compared with $1,507 at the US average. Your exact price depends on size, materials and your contractor — use the calculator above for your own numbers.
Do I need a permit for a drywall project in Pennsylvania?
It depends on the scope. Pennsylvania follows the Pennsylvania Uniform Construction Code (UCC), which applies statewide and is based on the IRC. Small drywall jobs often don't need a permit, but anything structural, electrical or plumbing-related usually does — check with your city or county building department.
Is drywall cheaper in Pennsylvania than in other states?
Pennsylvania's construction cost index is 1.03, 3% above the US average and the 18th highest of the 50 states and DC. Among the 10 most populous states, Pennsylvania ranks 7th cheapest for this project.
Does the estimate include sales tax?
No. Sales tax on materials in Pennsylvania is 6% state rate; 7% in Allegheny County (Pittsburgh) and 8% in Philadelphia. Contractors usually build it into their quotes, so compare quotes on the same basis.