Roof Replacement Cost for a 1,000 Sq Ft House

Replacing the roof on a 1,000 sq ft single-story house costs about $5,755–$8,953 with architectural shingles — typically around $7,354 at 2026 US average prices. Change any number below to price your exact project.

Updated October 2026 Adjusted for all 50 states + DC Free · no sign-up

Enter your project

Fill in the basics — we use typical values for everything else.

ft
ft
More optionsroof pitch, roof style, eave overhang…
in
Free · no obligation

Get free quotes from local roofers

Compare up to 3 prices from roofing pros near you. Your estimate above is sent along so they quote the right job.

  • Takes 30 seconds
  • Free, with no obligation to hire
  • Use your estimate to spot an overpriced quote

Quick answer

Replacing the roof on a 1,000 sq ft single-story house costs about $5,755–$8,953 with architectural shingles — typically around $7,354 at 2026 US average prices. The roof itself measures about 1,279 sq ft (12.8 squares), so you'd order 15 squares, or 43 bundles of shingles, including waste.

Assumes a 42×24 ft footprint, 6/12 gable roof, 12-inch overhangs and tear-off of one old layer.

Cost by roofing material for a 1,000 sq ft house

MaterialInstalled costTypical
Asphalt 3-tab$5,244–$7,930$6,587
Architectural shingles$5,755–$8,953$7,354
Exposed-fastener metal$8,186–$13,302$10,744
Standing-seam metal$12,662–$20,975$16,819
Cedar shake$10,744–$18,417$14,581
Concrete tile$12,662–$20,975$16,819

How roof pitch changes the size and price

PitchRoof areaSquaresArchitectural shingles
4/121,206 sq ft12.1$5,426–$8,440
6/12 (most common)1,279 sq ft12.8$5,755–$8,953
8/121,375 sq ft13.8$6,386–$9,934
10/121,489 sq ft14.9$7,346–$11,427
12/121,618 sq ft16.2$8,444–$13,135

What to know before you buy or hire

Your living area is not your roof area. A roof covers the home's footprint plus the overhangs, and a sloped roof has more surface than the flat footprint under it. That's why a 1,000 sq ft single-story home needs roughly 1,279 sq ft of roofing, about 28% more than the house size.

Two-story homes need a much smaller roof. A 1,000 sq ft two-story house sits on a footprint of only about 500 sq ft, so its roof costs roughly half as much. Attached garages and covered porches add to the roof, so include them in your measurements.

By state: 1,000 sq ft house in the 10 largest states

Same project, priced with each state's 2026 labor and material costs (architectural shingles — full replacement):

StateRangeTypical
North Carolina$5,122 – $7,968$6,545
Georgia$5,237 – $8,147$6,692
Texas$5,295 – $8,237$6,766
Florida$5,468 – $8,505$6,986
Ohio$5,583 – $8,684$7,134
Michigan$5,755 – $8,953$7,354
Pennsylvania$5,928 – $9,222$7,575
Illinois$6,331 – $9,848$8,090
New York$6,907 – $10,744$8,825
California$7,022 – $10,923$8,972

Your state isn't listed? Pick it in the calculator above — all 50 states and DC are adjusted.

Other sizes

Frequently asked questions

How many squares is a roof on a 1,000 sq ft house?

About 12.8 squares for a single-story home with a 6/12 pitch and 12-inch overhangs. Add 10–15% for waste and you would order around 15 squares. Steeper roofs and hip or complex roofs need more.

How many bundles of shingles do I need for a 1,000 sq ft house?

About 43 bundles. Most shingles come three bundles to a square, and that count already includes a 10% waste allowance for a simple gable roof.

How much does a metal roof cost on a 1,000 sq ft house?

Standing-seam metal runs about $12,662–$20,975, and exposed-fastener metal about $8,186–$13,302, including tear-off of one layer.

Does insurance pay for a new roof?

Homeowners insurance usually covers sudden damage such as hail or wind, not age or wear. If you suspect storm damage, call your insurer before signing with a roofer.

Estimates are for planning and comparing quotes, based on 2026 US average prices. They are not bids. How we estimate costs.