Quick answer
Replacing the roof on a 2,000 sq ft single-story house costs about $10,983–$17,084 with architectural shingles — typically around $14,033 at 2026 US average prices. The roof itself measures about 2,441 sq ft (24.4 squares), so you'd order 27 squares, or 81 bundles of shingles, including waste.
Assumes a 57×35 ft footprint, 6/12 gable roof, 12-inch overhangs and tear-off of one old layer.
Cost by roofing material for a 2,000 sq ft house
| Material | Installed cost | Typical |
|---|---|---|
| Asphalt 3-tab | $10,006–$15,132 | $12,569 |
| Architectural shingles | $10,983–$17,084 | $14,033 |
| Exposed-fastener metal | $15,620–$25,382 | $20,501 |
| Standing-seam metal | $24,162–$40,026 | $32,094 |
| Cedar shake | $20,501–$35,145 | $27,823 |
| Concrete tile | $24,162–$40,026 | $32,094 |
How roof pitch changes the size and price
| Pitch | Roof area | Squares | Architectural shingles |
|---|---|---|---|
| 4/12 | 2,301 sq ft | 23.0 | $10,354–$16,106 |
| 6/12 (most common) | 2,441 sq ft | 24.4 | $10,983–$17,084 |
| 8/12 | 2,624 sq ft | 26.2 | $12,186–$18,956 |
| 10/12 | 2,842 sq ft | 28.4 | $14,018–$21,806 |
| 12/12 | 3,087 sq ft | 30.9 | $16,113–$25,065 |
What to know before you buy or hire
Your living area is not your roof area. A roof covers the home's footprint plus the overhangs, and a sloped roof has more surface than the flat footprint under it. That's why a 2,000 sq ft single-story home needs roughly 2,441 sq ft of roofing, about 22% more than the house size.
Two-story homes need a much smaller roof. A 2,000 sq ft two-story house sits on a footprint of only about 1,000 sq ft, so its roof costs roughly half as much — see the 1,000 sq ft house estimate. Attached garages and covered porches add to the roof, so include them in your measurements.
By state: 2,000 sq ft house in the 10 largest states
Same project, priced with each state's 2026 labor and material costs (architectural shingles — full replacement):
| State | Range | Typical |
|---|---|---|
| North Carolina | $9,775 – $15,205 | $12,490 |
| Georgia | $9,994 – $15,547 | $12,770 |
| Texas | $10,104 – $15,717 | $12,911 |
| Florida | $10,434 – $16,230 | $13,332 |
| Ohio | $10,653 – $16,572 | $13,612 |
| Michigan | $10,983 – $17,084 | $14,033 |
| Pennsylvania | $11,312 – $17,597 | $14,454 |
| Illinois | $12,081 – $18,793 | $15,437 |
| New York | $13,179 – $20,501 | $16,840 |
| California | $13,399 – $20,843 | $17,121 |
Your state isn't listed? Pick it in the calculator above — all 50 states and DC are adjusted.
Other sizes
Frequently asked questions
How many squares is a roof on a 2,000 sq ft house?
About 24.4 squares for a single-story home with a 6/12 pitch and 12-inch overhangs. Add 10–15% for waste and you would order around 27 squares. Steeper roofs and hip or complex roofs need more.
How many bundles of shingles do I need for a 2,000 sq ft house?
About 81 bundles. Most shingles come three bundles to a square, and that count already includes a 10% waste allowance for a simple gable roof.
How much does a metal roof cost on a 2,000 sq ft house?
Standing-seam metal runs about $24,162–$40,026, and exposed-fastener metal about $15,620–$25,382, including tear-off of one layer.
Does insurance pay for a new roof?
Homeowners insurance usually covers sudden damage such as hail or wind, not age or wear. If you suspect storm damage, call your insurer before signing with a roofer.