10×10 Deck Cost

A 10×10 ft deck (100 sq ft) costs about $3,730–$6,660 built with pressure-treated wood, and about $6,510–$11,260 with composite decking (2026 US average, installed with railing and 3 steps). Change any number below to price your exact project.

Updated October 2026 Adjusted for all 50 states + DC Free · no sign-up

Enter your project

Fill in the basics — we use typical values for everything else.

ft
ft
More optionsboard length, railing length, stair steps…
ft
steps
Free · no obligation

Get free quotes from local deck builders

Compare up to 3 prices from deck pros near you. Your estimate above is sent along so they quote the right job.

  • Takes 30 seconds
  • Free, with no obligation to hire
  • Use your estimate to spot an overpriced quote

Quick answer

A 10×10 ft deck (100 sq ft) costs about $3,730–$6,660 built with pressure-treated wood, and about $6,510–$11,260 with composite decking (2026 US average, installed with railing and 3 steps). Building it yourself, pressure-treated materials run about $1,492–$2,997.

Assumes a low, ground-level deck, 26 ft of railing on three sides and one set of 3 steps.

10×10 deck cost by material

DeckingInstalledPer sq ft
Pressure-treated pine$3,730–$6,660$37–$67
Cedar$4,990–$8,220$50–$82
Composite (Trex-type)$6,510–$11,260$65–$113
PVC$7,770–$12,520$78–$125
Tropical hardwood$8,270–$14,280$83–$143

What to know before you buy or hire

Deck price depends on three things: size, decking material and height. A raised deck needs taller posts, bigger beams, more railing and often engineered plans, so a second-story 10×10 deck can cost 30–60% more than a ground-level one.

Composite costs more up front but needs no staining or sealing, so over 15–20 years the gap shrinks. Most US cities require a permit for decks attached to the house or more than 30 inches off the ground.

By state: 10x10 deck in the 10 largest states

Same project, priced with each state's 2026 labor and material costs (complete deck, installed):

StateRangeTypical
North Carolina$3,320 – $5,927$4,624
Georgia$3,394 – $6,061$4,727
Texas$3,432 – $6,127$4,779
Florida$3,544 – $6,327$4,935
Ohio$3,618 – $6,460$5,039
Michigan$3,730 – $6,660$5,195
Pennsylvania$3,842 – $6,860$5,351
Illinois$4,103 – $7,326$5,715
New York$4,476 – $7,992$6,234
California$4,551 – $8,125$6,338

Your state isn't listed? Pick it in the calculator above — all 50 states and DC are adjusted.

Other sizes

Frequently asked questions

How much does a 10x10 deck cost?

About $3,730–$6,660 in pressure-treated wood or $6,510–$11,260 in composite, installed with railing and steps.

How many deck boards for a 10x10 deck?

About 25 boards of 16 ft (5.5 in wide), with 9 joists at 16 inches on center.

Do I need a permit for a 10x10 deck?

Usually yes if it's attached to the house or higher than 30 inches. Check with your city or county building department before you start.

Estimates are for planning and comparing quotes, based on 2026 US average prices. They are not bids. How we estimate costs.