Quick answer
A typical 12×50 ft single-car driveway at 4 inches deep needs about 7.4 cubic yards, or 10.0 tons, of crushed stone. Delivered in bulk, that costs about $341–$654 (2026 US average) before spreading.
Crushed stone at about 1.35 tons per cubic yard. New driveways usually need a deeper base layer — see the table.
Gravel needed by driveway size
| Driveway | Depth | Cubic yards | Tons | Delivered |
|---|---|---|---|---|
| 10×40 ft | 4 in | 4.9 | 6.7 | $248–$486 |
| 12×50 ft | 4 in | 7.4 | 10.0 | $341–$654 |
| 12×50 ft | 8 in | 14.8 | 20.0 | $623–$1,157 |
| 20×40 ft | 4 in | 9.9 | 13.3 | $435–$822 |
| 12×100 ft | 6 in | 22.2 | 30.0 | $904–$1,661 |
What to know before you buy or hire
A long-lasting gravel driveway is built in layers: 4–6 inches of large base stone (such as #3 or #4 stone), then 2–4 inches of smaller crushed stone with fines (such as crusher run / #57 or #411) that packs down hard. Topping up an existing driveway usually needs only 2 inches.
By state: driveway in the 10 largest states
Same project, priced with each state's 2026 labor and material costs (bulk, delivered):
| State | Range | Typical |
|---|---|---|
| North Carolina | $326 – $625 | $476 |
| Georgia | $329 – $630 | $480 |
| Texas | $331 – $633 | $482 |
| Florida | $335 – $641 | $488 |
| Ohio | $337 – $646 | $492 |
| Michigan | $341 – $654 | $498 |
| Pennsylvania | $346 – $662 | $504 |
| Illinois | $355 – $680 | $517 |
| New York | $369 – $706 | $537 |
| California | $372 – $711 | $541 |
Your state isn't listed? Pick it in the calculator above — all 50 states and DC are adjusted.
Frequently asked questions
How many tons of gravel for a driveway?
About 10.0 tons for a 12×50 ft driveway at 4 inches deep. A new driveway with an 8-inch base needs about twice that.
What is the best gravel for a driveway?
Crushed stone with fines (crusher run, #57 or #411) packs down firm and stays in place. Pea gravel and river rock are round and roll under tires, so they're better for paths.