Quick answer
A 20×30 ft concrete slab (600 sq ft) costs about $4,500–$7,800 poured and finished by a contractor at 4 inches thick, or $6,750–$11,700 at 6 inches (2026 US average). It needs about 8.2 cubic yards of concrete (12.2 yd³ at 6 in).
Includes 10% extra concrete. Excavation, gravel base, rebar upgrades and permits are extra — see notes below.
20×30 slab cost by thickness
| Thickness | Concrete | Poured & finished | Ready-mix only |
|---|---|---|---|
| 4 in | 8.15 yd³ | $4,500–$7,800 | $1,344–$1,630 |
| 5 in | 10.19 yd³ | $5,625–$9,750 | $1,681–$2,037 |
| 6 in | 12.22 yd³ | $6,750–$11,700 | $2,017–$2,444 |
What to know before you buy or hire
For a 20×30 shop or garage floor, most contractors recommend a 4–6 inch slab on 4 inches of compacted gravel, with rebar or wire mesh. Garages and shops that hold vehicles, lifts or heavy equipment should be 5–6 inches with thickened edges.
The quote should list site prep (digging and grading), the gravel base, reinforcement, finish type and any permit separately. These can add 10–30% to the pour price on uneven ground.
By state: 20x30 slab in the 10 largest states
Same project, priced with each state's 2026 labor and material costs (professionally poured & finished):
| State | Range | Typical |
|---|---|---|
| North Carolina | $4,005 – $6,942 | $5,474 |
| Georgia | $4,095 – $7,098 | $5,597 |
| Texas | $4,140 – $7,176 | $5,658 |
| Florida | $4,275 – $7,410 | $5,843 |
| Ohio | $4,365 – $7,566 | $5,966 |
| Michigan | $4,500 – $7,800 | $6,150 |
| Pennsylvania | $4,635 – $8,034 | $6,335 |
| Illinois | $4,950 – $8,580 | $6,765 |
| New York | $5,400 – $9,360 | $7,380 |
| California | $5,490 – $9,516 | $7,503 |
Your state isn't listed? Pick it in the calculator above — all 50 states and DC are adjusted.
Other sizes
Frequently asked questions
How many yards of concrete for a 20x30 slab?
About 8.2 cubic yards at 4 inches and 12.2 cubic yards at 6 inches, including 10% extra.
How much does a 20x30 slab cost per square foot?
About $8–$13 per sq ft poured and finished at 4 inches thick.
Can I pour a 20x30 slab myself?
It's possible but hard: 8.2 yards of concrete must be placed and finished before it sets. Most DIYers hire a finishing crew or at least order ready-mix with a pump.